Yukon/Denali XL 1500 2WD V8-5.3L VIN Z Flex Fuel (2004)
Tighten the bolts to 53 N.m (39 lb ft).
3. Install the inboard pivot bolt (1).
Tighten the bolt to 35 N.m (26 lb ft).
4. Install the seat belt retractor.
5. Install the lumbar assembly (or power lumbar/bolster assembly if equipped).
6. Install the seat back trim cover and pad.
7. Connect the lumbar cable (6) underneath the seat cushion (disconnect the wire harness if equipped with power lumbar).
8. Install the seat trim panel.
9. Install the head restraint and guides.
10. Install the seat into the vehicle.