Yukon/Denali XL 1500 2WD V8-5.3L VIN Z Flex Fuel (2004)
Idler Arm: Service and Repair
Idler Arm Replacement
^
Tools Required
-
J 24319-B Universal Steering Linkage Puller
-
J 29193 Steering Linkage Installer (12 mm)
-
J 29194 Steering Linkage Installer (14 mm)
Removal Procedure
Notice: Do not attempt to free the ball stud by using a pickle fork or wedge type tool, because seal or bushing damage could result. Use the proper
tool to separate all ball joints.
1. Raise the vehicle.
2. Remove the engine protection shield, if equipped.
3. Remove the idler arm ball stud nut (10).
Do not reuse the idler arm ball stud nut.
4. Remove the idler arm from the relay rod using the J 24319-B.