Yukon/Denali XL 1500 2WD V8-5.3L VIN Z Flex Fuel (2004)
Front Steering Knuckle: Service and Repair
Rear
Steering Knuckle Replacement
^
Tools required
-
J 24319-B Universal Steering Linkage Puller
Removal Procedure
Notice: Refer to Rear Wheel Steering Lifting and Jacking Notice in Cautions and Notices.
1. Raise the vehicle.
2. Remove the tire and wheel.
3. Remove the wheel hub and bearing.
4. Remove the upper ball joint.
5. Remove the lower ball joint.
6. Remove the outer tie rod retaining nut and bracket (2).
7. Disconnect the outer tie rod from the steering knuckle using the J24319-B (1).
