gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Steering Knuckle|Rear|Page 8478 > < Front Steering Knuckle|Rear|Page 8476
Page 1
background image

Front Steering Knuckle: Service and Repair
Front

Coil Spring Suspension

Steering Knuckle Replacement (Coil Spring Suspension)

-

J 43631 Ball Joint Remover

-

J 45851 Ball Joint Separator Protector Adapters

Removal Procedure

1. Raise and support the vehicle. 
2. Remove the tire and wheel. 
3. Support the lower control arm with a suitable jack.
4. Remove the wheel hub and bearing. 
5. Disconnect the Electronic Suspension Control (ESC) link rod from the sensor, if equipped. 

6. Disconnect the outer tie rod from the knuckle. 
7. Remove the brake hose bracket retaining bolt from the knuckle.

Front Steering Knuckle|Rear|Page 8478 > < Front Steering Knuckle|Rear|Page 8476