Yukon/Denali XL 1500 2WD V8-6.0L VIN U (2005)
Sun Visor: Procedures
SUNSHADE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screws.
2. Disconnect the electrical connector, if equipped.
3. Remove the sunshade.
INSTALLATION PROCEDURE
1. Connect the electrical connector, if equipped.
2. Install the sunshade.
3. Install the sunshade screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 2 N.m (18 lb in).
