Yukon/Denali XL 1500 2WD V8-6.0L VIN U (2005)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement (Rear Tank)
FUEL LEVEL SENSOR REPLACEMENT (REAR TANK)
REMOVAL PROCEDURE
1. Remove the sending unit.
2. Disconnect the level sensor electrical connector.
3. Release the level sensor retaining clip.
4. Squeeze the locking tangs together, and remove the fuel level sensor (1).
INSTALLATION PROCEDURE
1. Install the fuel level sensor (1).
2. Connect the level sensor electrical connector.
3. Install the sending unit.
