Yukon/Denali XL 1500 2WD V8-6.0L VIN U (2005)
Axle Shaft Assembly: Service and Repair
Rear Axle Shaft Replacement (8.6 Inch Axle W/JL4)
Rear Axle Shaft Replacement (8.6 Inch Axle W/JL4)
^
Tools Required
-
J 2619-01 Slide Hammer
-
J 45859Axle Remover
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper.
4. Remove the rear wheel speed sensor.
5. Remove the rear cover and the gasket.
6. Remove the pinion shaft locking bolt.
7. Remove the pinion shaft.