Yukon/Denali XL 1500 4WD V8-5.3L VIN T (2004)
Carpet: Removal and Replacement
Carpet Replacement - Front
Carpet Replacement - Front
Removal Procedure
1. Remove the front seats.
2. Remove the rear seats.
3. Remove the front center seat.
4. Remove the floor center console, if equipped.
5. Remove the lower bracket from the I/P to the floor to allow carpet removal.
6. Remove the door sill trim plates.
7. Remove the hinge pillar trim panels from both sides.
8. Remove the garnish molding center pillar trim.
9. Remove the carpet.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original installation. Always return the carpet to the original location.
1. Install the carpet.
2. Install the garnish molding center pillar trim.
3. Install the hinge pillar trim panels.
4. Install the door sill trim plates.
5. Install the lower bracket from the I/P to the floor.
6. Install the floor center console, if equipped.
7. Install the front center seats, if equipped.
8. Install the rear seats.
9. Install the front seats.
Carpet Replacement - Rear
Carpet Replacement - Rear
Removal Procedure
