Yukon/Denali XL 1500 4WD V8-5.3L VIN T (2004)
6. Install the park brake cable taking care to correctly route the cable though the guides and the body mounts.
7. Install the park brake cable into the mounting bracket until the locking tabs snap into place.
8. Install the park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Lower the vehicle.
Park Brake Cable Replacement - Intermediate
Park Brake Cable Replacement Intermediate
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting..
3. Remove the nut from the threaded end of the intermediate cable.
4. Disconnect the equalizer from the rear park brake cables.
