Yukon/Denali XL 1500 4WD V8-5.3L VIN T (2004)
Engine Mount: Service and Repair
Engine Mount Bracket Replacement
Left
Engine Mount Bracket Replacement - Left
Removal Procedure
1. Remove the engine mount. Refer to Engine Mount Replacement - Left.
2. Remove the engine mount bracket bolts.
3. Remove the engine mount bracket.
Installation Procedure
1. Install the engine mount bracket.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bracket bolts.
Tighten the engine mount bracket bolts to 75 Nm (55 ft. lbs.).
3. Install the engine mount. Refer to Engine Mount Replacement - Left.
Right
Engine Mount Bracket Replacement - Right
Removal Procedure
1. Remove the engine mount. Refer to Engine Mount Replacement - Right.