Yukon/Denali XL 1500 4WD V8-5.3L VIN T (2004)
Oil Change Reminder Lamp: Service and Repair
GM OIL LIFE SYSTEM - RESETTING
Reset the oil life monitor when the oil has been changed, use the following procedure.
1. Turn the ignition key to the RUN position.
2. Fully push and release the accelerator pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes, the system is resetting.
4. Start the vehicle.
5. The oil life will change to 100%.
6. If the Change Oil Soon light comes back on, the system has not reset. Repeat the procedure.
