Yukon/Denali XL 1500 4WD V8-5.3L VIN T (2004)
2. Install the new rear axle housing cover bolts (1).
^
Tighten the bolts to 40 Nm (30 ft. lbs.).
3. Fill the rear axle. Use the proper fluid.
4. Install the rear axle fill plug.
^
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
5. Lower the vehicle.
(9.5,10.5 Inch Axle)
Lubricant Replacement - Rear Drive Axle (9.5,10.5 Inch Axle)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Remove the rear axle fill plug.