Yukon/Denali XL 1500 4WD V8-5.3L VIN T (2004)
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the left rear speed sensor.
^
Tighten the speed sensor to 15 Nm (11 ft. lbs.).
2. Connect the left rear speed sensor electrical connector (4).
3. Lower the vehicle.
Transfer Case Speed Sensor Replacement- Right Rear
Transfer Case Speed Sensor Replacement- Right Rear
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Disconnect the right rear speed sensor electrical connector (3).
