Yukon/Denali XL 1500 4WD V8-5.3L VIN T (2004)
Axle Bearing: Service and Repair
Rear Axle Hub, Bearing, Cup, and/or Seal Replacement
^
Tools Required
-
J 8092 Universal Driver Handle-3/4 inch - 10
-
J 2222-C Wheel Bearing Nut Wrench
-
J 24426 Wheel Bearing Race Installer-Outer
-
J 24427 Wheel Bearing Race Installer-Inner
-
J 44419 Hub Outer Bearing Race Installer
-
J 44420 Differential Bearing and Hub Seal Installer
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Remove the tire and wheel assembly.
3. Remove the brake caliper.
4. Remove the axle shaft.
5. Remove the axle nut retaining ring.
6. Remove the key.
