Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
2. Remove the garnish molding.
3. Remove the speaker.
4. Disconnect the electrical connectors, as necessary.
INSTALLATION PROCEDURE
1. Connect the electrical connectors, as necessary.
2. Install the speaker.
3. Install the garnish molding.
4. Install the garnish molding.
5. Verify the component's operation.
Rear Door
SPEAKER REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Remove the screws (1) retaining the speaker to the mounting bracket.
3. Disconnect the electrical connector from the speaker.
4. Remove the speaker from the mounting bracket.
5. Remove the bolts (2) retaining the speaker mounting bracket to the door, if required.
6. Remove the speaker mounting bracket.
INSTALLATION PROCEDURE
