Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
Parking Assist Control Module: Service and Repair
REAR OBJECT ALARM DETECTION MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Lift the passenger second row seat cushion to gain access to the rear object detection module (2).
2. Disconnect the electrical connector (1) from the module (2).
3. Remove the fasteners (3).
4. Remove the module (2).
INSTALLATION PROCEDURE
1. Install the module (2).
2. Install the module fasteners (3).
NOTE: Refer to Fastener Notice in Service Precautions.