Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
Disc Brake Backing Plate Replacement - Rear (15 Series W/NYS)
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting..
3. Remove the tire and wheel assembly. Refer to Tire and Wheel F7emoval and Installation in Tires and Wheels.
4. Relieve the tension from the park brake cable by pulling down on the intermediate cable then release the cable from the equalizer bar.
5. Remove the rear park brake bracket bolt
6. Remove the park brake cable from the park brake actuator lever.
7. Remove the wheel bearing. Refer to Wheel Hub and Bearing Replacement in Rear Wheel Steering.
8. Remove the park brake shoe.
