Yukon V8-350 5.7L (1992)
7. Rotate inner race (16) 90 degrees to center line of cage (17) with lands of inner race aligned with windows of cage.
8. Pivot inner race (16) into cage (17) window and remove inner race.
Assemble
1. Put a light coat of grease supplied with boot kit on ball grooves of inner (16) and outer race (15).
Important
^
Be sure that retaining ring side of inner race (16).
2. Reverse steps 1 through 8 of DISASSEMBLE procedure. faces axle shaft (12).
3. Install outer joint seal.