Yukon 2WD V8-5.3L (2007)
2. Rotate the rotor until the highest reading is displayed on the dial.
3. Mark the location of the high spot relative to the nearest wheel stud, or studs.
4. Measure and record the amount of LRO.
16. Compare the brake rotor assembled LRO to the following specification:
Brake rotor maximum allowable assembled lateral runout: 0.13 mm (0.005 in)
Brake rotor maximum allowable assembled lateral runout: 0.25 mm (0.010 in)
17. If the brake rotor assembled LRO measurement exceeds the specification, bring the LRO to within specifications. Refer to Brake Rotor Assembled
Lateral Runout Correction. See: Brake Rotor Assembled Lateral Runout Correction
18. If the brake rotor assembled LRO measurement is within specification, install the brake caliper and depress the brake pedal several times to secure
the rotor in place before removing the J 45101-100 and the lug nuts.
