Yukon 2WD V8-5.3L (2007)
Notice: Refer to Fastener Notice.
7. Install the bolt to the rear axle cable clip (2500 series).
Tighten the bolt to 22 N.m (16 lb ft).
Important: After installing the cable to the rear axle holding clip, verify the clip is securely retaining the cable. If not, crimp the clip by
hand taking care not to pinch or kink the cable.
8. Install the cable to the differential clip (2500 series).
9. Connect the right rear park brake cable (2) to the intermediate park brake cable (1) equalizer.
10. Lower the vehicle. Refer to Lifting and Jacking the Vehicle.
11. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling.
12. Adjust the park brake. Refer to Park Brake Adjustment.
Park Brake Cable Guide Replacement
Park Brake Cable Guide Replacement
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
