Yukon 2WD V8-5.3L (2007)
Driver/Vehicle Information Display: Description and Operation
Driver Information Center (DIC)
DRIVER INFORMATION CENTER (DIC) DESCRIPTION AND OPERATION
The driver information center (DIC) displays the DIC WOW for 5 seconds when it first powers up. If enabled through Personalization, the DIC then
returns to the last display status before no power condition.
There are 4 switch functions for the DIC.
-
Personalization
-
Set/Reset
-
Trip/Fuel
-
Vehicle Info
Trip/Fuel
The Trip/Fuel switch is used to navigate between vehicle information parameters. Cycle through the following vehicle parameters by successive
pressing of the Trip/Fuel switch
-
Accell Rate
-
Average Fuel Economy (AFE)
-
Average Vehicle Speed (AVE)
-
Fuel Range
-
Fuel Used
-
Instantaneous Fuel Economy (IFE)/ Displacement on Demand (DOD)
-
Maximum Speed
-
Odometer
-
Trans Temp
-
Trip A
-
Trip B
-
Trip Time
Vehicle Info
The Vehicle Info switch is used to navigate between vehicle information parameters. Cycle through the following vehicle parameters by successive
pressing of the Vehicle Info switch.
-
Blank Display
-
English/Metric Units
-
Key Fob Programming Menu
-
Left Front Tire Pressure
-
Left Rear Tire Pressure
-
Oil Life Index (OLI)
-
Right Front Tire Pressure
-
Right Rear Tire Pressure
-
Tire Programming Menu
Personalization
The Personalization switch is used to set personalization features for both the vehicle and the driver. Many of the parameters in the Trip/Fuel menu
and the Vehicle Info menu can be programmed through the Personalization switch. In addition to the parameters in the Trip/Fuel and Vehicle Info
menus, the following features can also be programmed.
-
Approach Lighting
-
Automatic Door Lock
-
Automatic Door Unlock
-
Chime Volume
-
Delayed Door Lock
-
Display Language
-
Easy Exit Seat
-
Exit Lighting
-
Memory Seat Recall
-
Remote Door Lock
-
Remote Door Unlock
-
Remote Start
-
Park Tilt Mirrors
-
Smart High Beams
Average Fuel Economy
Average fuel economy is calculated using the equation: AFE = Distance/Fuel
-
Distance = The accumulated distance travelled since the last reset of this value