Yukon 2WD V8-5.3L (2007)
Turn Signal Switch: Service and Repair
Turn Signal Switch Cancel Cam Position Plate Replacement
Turn Signal Switch Cancel Cam Position Plate Replacement
Tools Required
^
J 23653-SIR Steering Column Lock Plate Compressor
^
J 42137 Cam Orientation Plate Adapter
Removal Procedure
Caution: Refer to SIR Caution.
1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling.
Important: Let the SIR coil hang freely after removal.
2. Remove the SIR coil.
3. Remove and discard the bearing retainer using J 23653-SIR and J 42137.
4. Remove the following parts from the steering column shaft assembly:
1. Turn signal switch cancel cam plate (2)
2. Turn signal switch cancel cam (3)
Installation Procedure