Yukon 2WD V8-5.3L (2007)
Shackle: Service and Repair
Spring Shackle Replacement (2500 Series)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the leaf spring assembly from vehicle.
3. Remove the shackle nut and the bolt from the spring.
Installation Procedure
1. Install the shackle to the spring.
Notice: Refer to Fastener Notice.
2. Install the shackle nut and bolt to the spring.
Tighten the shackle nut to 95 N.m (70 lb ft).
3. Install the leaf spring assembly to the vehicle.
4. Remove the safety stands.
5. Lower the vehicle.
