Yukon 2WD V8-5.3L (2007)
6. Remove the cooling lines from the transmission.
7. Remove the oil cooling lines from the vehicle.
Installation Procedure
1. Install the transmission oil cooler lines to the vehicle.
2. Install the cooling lines to the transmission.
3. Install the engine protection shield.
4. Lower the vehicle.
5. Install the transmission fluid cooler hose to the radiator.
6. Install the transmission fluid cooler hose to the auxiliary oil cooler.
7. Install the front grill assembly.
Vent Hose
Vent Hose
Removal Procedure
