gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (8.6, 9.5 LD Axles)|Page 13383 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6, 9.5 LD Axles)

Yukon 2WD V8-5.3L (2007)

Page 2
background image

3. Install the axle shaft seal using the J 21128.
4. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
5. Install the axle shaft. 
6. Install the rear axle housing cover. 
7. Install the tire and wheel assembly. 
8. Fill the rear axle. Refer to Rear Axle Lubricant Replacement.
9. Lower the vehicle.

Rear Axle Shaft Seal and/or Bearing Replacement (8.6, 9.5 LD Axles)|Page 13383 > < Rear Axle Shaft Seal and/or Bearing Replacement (8.6, 9.5 LD Axles)