Yukon 2WD V8-5.3L VIN T (2006)
7. Clean and prepare all of the bare metal surfaces.
8. Apply an approved anti-corrosion primer.
9. Apply a full-bodied caulk to the entire hinge mounting surface in order to ensure a proper seal.
10. Align the hinge and the backing plate with the holes in the door (Fig. 4-43).
NOTE: Refer to Fastener Notice in Service Precautions.
11. Install the bolts.
12. Torque the bolts to 25 N.m (20 ft lb).
13. Apply the sealers.
14. Refinish the metal surfaces as necessary.
15. Install and align all of the related panels and the components.
