Yukon 2WD V8-5.3L VIN T (2006)
Rear Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Rear Door
Weatherstrip Replacement - Rear Door
Removal Procedure
1. Open the door.
2. Remove the weatherstrip from the mounting surface.
Installation Procedure
Important: Apply the weatherstrip in an environment that is free from dust or dirt that could come into contact with the adhesive backing.
Foreign material may cause improper adhesion.
1. Install the weatherstrip to the mounting surface by completing the following steps:
1. Peel off the backing paper.
2. Press the retainers into place.
2. Close the door.