Yukon 2WD V8-5.3L VIN T (2006)
11. Install the heater hose bracket and nut.
Tighten the nut to 9 Nm (80 inch lbs.).
12. Position the surge tank/heater hoses to the heater hose bracket.
13. Install the spark plug wires to the ignition coils.
14. Position the engine harness, if necessary.
15. Install the harness clips (1).
16. Connect the main electrical connector (4) feeding the ignition coils.
17. Install the CPA lock (5).
18. Install the engine sight shield, if required.