Yukon 2WD V8-5.3L VIN T (2006)
Clock: Service and Repair
CLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Remove the console upper bezel.
2. From the back of the bezel remove the retaining screws.
3. Remove the clock from the bezel.
INSTALLATION PROCEDURE
1. Install the clock to the bezel.
2. Install the retaining screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the retaining screws to 2 N.m (17 lb in).
3. Install the bezel to the console.
