Yukon 2WD V8-5.3L VIN T (2006)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement
PARK/TURN SIGNAL LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Ensure the headlamp switch is in the OFF position.
2. Remove the headlamp.
3. Remove the park/turn signal lamp assembly by pushing on the inboard retainer clip.
4. Disconnect the electrical connector from the park/turn signal lamp.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the park/turn signal lamp.
2. Install the lamp assembly.
3. Install the headlamp.
