Yukon 2WD V8-5.3L VIN T (2006)
1. Apply sealant GM P/N 12346004, (Canadian P/N 10953480), or equivalent, to the threads of the oil pressure sensor.
Notice: Refer to Fastener Notice in Service Precautions.
2. Using J 41712 or equivalent, install the oil pressure sensor.
Tighten the oil pressure sensor to 30 Nm (22 ft. lbs.).
3. Connect the oil pressure sensor electrical connector (1).
4. If necessary, install the engine sight shield. Refer to Engine Sight Shield Replacement (4.8L, 5.3L, and 6.0L (RPO LQ4)) Engine Sight Shield
Replacement (6.0L (RPO LQ9)).
