gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 1548
Page 2
background image

2. Install the ECT sensor.

Tighten the sensor to 20 N.m (15 lb ft).

3. Connect the ECT sensor electrical connector (5).
4. Refill the cooling. Refer to Draining and Filling Cooling System in Cooling System.

Crankshaft Position Sensor > < Engine - MIL ON P0116/P1400 Set In Very Cold Temps|Page 1548