Yukon 2WD V8-5.3L VIN T (2006)
^
Repeat items for outer bead.
Install the tire on the wheel.
5. Important: A service replacement tire pressure sensor is shipped in OFF mode. In this mode the sensor's unique identification code cannot be
learned into the passenger door modules (PDMs) memory. The sensor must be taken out of OFF mode by spinning the tire/wheel assembly above
32 km/h (20 mph) in order to close the sensors internal roll switch for at least 10 seconds.
Install the tire/wheel assembly on the vehicle.
6. Lower the vehicle.
7. Learn the tire pressure sensors.
