Yukon 2WD V8-5.3L VIN T (2006)
1. Notice: Refer to Fastener Notice in Service Precautions.
Install the rear axle drain plug.
^
Tighten the rear axle drain plug to 33 Nm (24 ft. lbs.).
2. Fill the rear axle. Use the proper fluid. Refer to Capacities - Approximate Fluid and Fluid and Lubricant Recommendations .
3. Install the rear axle fill plug.
^
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
4. Lower the vehicle.