Yukon 2WD V8-5.7L VIN R (1997)
Lifter / Lash Adjuster: Service and Repair
Replacement, Engine Overhaul
-
Tools Required
-
J 3049 Valve Lifter Remover (Plier Type)
-
J 9290-01 Valve Lifter Remover (Slide Hammer Type)
1. Remove the valve lifter guide retainer and bolts.
2. Remove the valve lifter guides.
3. Place the components in a rack so that they can be reinstalled to their original location.
NOTE: Some valve lifters may be stuck in their bores because of gum or varnish deposits. Use the J 3049 or the J 9290-01 in order to remove
these valve lifters.