Yukon 4WD V8-5.3L (2008)
Luggage Rack: Service and Repair
Luggage Carrier Rivet Nut Replacement
Luggage Carrier Rivet Nut Replacement
Removal Procedure
1. Remove the luggage carrier.
Caution: Refer to Safety Glasses Caution.
2. Drill through the luggage carrier rivnut head using a 7.5 mm (0.295 in) drill bit.
3. Remove the rivnut from the roof.
Installation Procedure
1. Using a 10 mm (0.3937 in) drill bit, drill the rivnut hex shape hole in the roof out to a round 10 mm hole.
2. Install a replacement rivnut to the hole in roof using a rivnut tool, or equivalent.
3. Install the luggage carrier.
