Yukon 4WD V8-5.3L (2008)
10. Remove the BPMV bracket bolts (1).
11. Remove the BPMV.
12. If necessary, remove the EBCM. Refer to Electronic Brake Control Module Replacement (Without JL4) (See: Electronic Brake Control
Module/Service and Repair)Electronic Brake Control Module Replacement (With JL4) (See: Electronic Brake Control Module/Service and
Repair)Electronic Brake Control Module Replacement (J92) (See: Electronic Brake Control Module/Service and Repair) .
13. If removing the BPMV bracket from the BPMV, remove the BPMV mounting bolt (1).
14. Lift the BPMV from the mounting bracket.
15. Remove the grommets from the BPMV and the bracket.
Installation Procedure
1. If removed, install the EBCM. Refer to Electronic Brake Control Module Replacement (Without JL4) (See: Electronic Brake Control
Module/Service and Repair)Electronic Brake Control Module Replacement (With JL4) (See: Electronic Brake Control Module/Service and
Repair)Electronic Brake Control Module Replacement (J92) (See: Electronic Brake Control Module/Service and Repair) .
