Yukon 4WD V8-5.3L (2008)
2. Install the valve lifter oil manifold (1) to the engine.
Notice: Refer to Fastener Notice .
3. Install the valve lifter oil manifold bolts (2).
Tighten the bolts to 25 N.m (18 lb ft).
4. Connect the engine harness electrical connector (1) to the oil pressure sensor.
5. Install the intake manifold. Refer to Intake Manifold Replacement (RPOs LY2/LY6) (See: Intake Manifold/Service and Repair)Intake Manifold
Replacement (RPOs LC9/LMG/LY5/L76) (See: Intake Manifold/Service and Repair)Intake Manifold Replacement (RPO L92 - First Design) (
See: Intake Manifold/Service and Repair)Intake Manifold Replacement (RPO L92 - Second Design) (See: Intake Manifold/Service and Repair) .
