Yukon 4WD V8-5.3L (2008)
6. Partially remove the auxiliary inside air temperature sensor from the headliner.
7. Remove the sensor grille from the auxiliary inside air temperature sensor.
8. Remove the auxiliary inside air temperature sensor from the headliner.
Installation Procedure
1. Install the new sensor grille to the headliner.
2. Install the inside air temperature sensor to the headliner and sensor grille.
3. Connect the electrical connector to the inside air temperature sensor.
4. Secure the headliner to the roof hook and loop retainers.
5. Install the rear headliner retainers to the front headliner.
6. Install the left rear coat hook, if equipped.
7. Install the third pillar molding.
