Yukon 4WD V8-5.3L (2008)
Important: Snap Fit TPM sensors are still shipped in the OFF mode. However, the TPM no longer needs to be spun to remove it from
the OFF mode. The sensor will exit its OFF state when the tire is inflated. The technician can then program the vehicle as normal.
4. Mount the tire to the rim. Refer to Tire Mounting and Dismounting (See: Maintenance/Wheels and Tires/Tires/Service and Repair/Removal and
Replacement) .
5. Install the tire/wheel assembly on the vehicle. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and
Repair) .
6. Lower the vehicle.
7. Learn the tire pressure sensors. Refer to Tire Pressure Sensor Learn (Standard) (See: Service and Repair) .
