gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Seat Belts|Page 20870 > < Seat Belts|Page 20868
Page 2
background image

*

Remove the SIR coil from the steering column and allow the coil to hang freely before the shaft is rotated. Refer to Inflatable Restraint
Steering Wheel Module Coil Replacement   .

*

Visually inspect the steering shaft for sheared injected plastic (1). If the steering shaft shows sheared plastic, replace the steering shaft.

*

Inspect the steering shaft runout for any frame damage that could cause a bent steering shaft. Using a dial indicator at the lower end of the
steering shaft, rotate the steering wheel. The runout must not exceed 1.60 mm (0.0625 in).

Seat Belts|Page 20870 > < Seat Belts|Page 20868