Yukon 4WD V8-5.3L (2008)
Installation Procedure
1. Install the steering shaft upper bearing to the steering column tilt head assembly.
2. Install the steering column shaft assembly.
3. Maneuver and push the steering column tilt head assembly (1) towards the steering column in order to lock the steering wheel lock shoes in place.
4. Lubricate the pivot pins (1) with GM P/N 12346293 (Canadian P/N 992723).
5. Firmly seat each pivot pin (1) into the steering column tilt head assembly.
6. Stake the steering column in 3 locations around each pivot pin.
7. Install anti-rotation pin J 42640 .
