Yukon 4WD V8-5.3L (2008)
1. Install a NEW seal (2) to the indicator tube.
2. Install the oil level indicator tube (1).
3. Install the transmission. Refer to Transmission Replacement (See: Service and Repair/Removal and Replacement) .
4. Lower the vehicle.
5. Check the transmission fluid level. Refer to Transmission Fluid Check (See: Testing and Inspection/Component Tests and General
Diagnostics/6L50/6L80/6L90 - Automatic Transmission/Transmission Fluid Check) .
6. Install the transmission oil level indicator.
7. Lock the transmission oil level indicator.
