Yukon 4WD V8-5.3L (2008)
13. Remove the range selector lever cable heat shield bolts (1).
14. Remove the range selector lever cable heat shield (2).
15. Ensure the transmission manual shaft is positioned in mechanical park.
16. Disconnect the range selector lever cable (2) from the range select lever.
17. Remove the range selector lever cable retainer (1).
18. Remove the range selector lever cable (2) from the cable bracket.
Installation Procedure
1. Install the transmission range selector cable to the vehicle.
2. Ensure that the transmission manual shaft lever is in the mechanical park position.
