Yukon 4WD V8-5.3L (2008)
3. Using the J 21128 , install the axle shaft seal.
4. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
5. Install the axle shaft. Refer to Rear Axle Shaft Replacement (See: Axle Shaft Assembly/Axle Shaft/Service and Repair) .
6. Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement (10.5 Inch Axle) (See: Differential
Assembly/Differential Cover/Service and Repair/Rear Axle Housing Cover and Gasket Replacement (10.5 Inch Axle))Rear Axle Housing Cover
and Gasket Replacement (8.6/9.5 LD Axle) (See: Differential Assembly/Differential Cover/Service and Repair/Rear Axle Housing Cover and
Gasket Replacement (8.6/9.5 LD Axle)) .
7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair) .
8. Fill the rear axle. Refer to Rear Axle Lubricant Replacement (8.0/8.6 Inch Axle) (See: Differential Assembly/Fluid - Differential/Service and
Repair/Removal and Replacement/Rear Drive Axle/Rear Axle Lubricant Replacement (8.0/8.6 Inch Axle))Rear Axle Lubricant Replacement (10.5
Inch Axle) (See: Differential Assembly/Fluid - Differential/Service and Repair/Removal and Replacement/Rear Drive Axle/Rear Axle Lubricant
Replacement (10.5 Inch Axle)) .
9. Lower the vehicle.
