gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Endgate - Broken Rear Cargo Door Hinge|Page 10692 > < Rear Door Exterior Handle|Service and Repair
Page 1
background image

Technical Service Bulletin # 76-15-10

Date: 970401

Endgate - Broken Rear Cargo Door Hinge

File In Section: 10 - Body 

Bulletin No.: 76-15-10

Date: April, 1997

Subject: 
Broken Rear Cargo Door Hinge 
(Install Replacement Hinge)

Models: 
1992-97 Chevrolet and GMC C/K Suburban and Utility Models with Rear Cargo Doors (RPO ZW9)

Condition   

The door side of the hinge may fracture as a result of lack of lubrication, corrosion, or attempts to remove the hinge pin without following the procedure
outlined in GM Service Bulletin No. 36-10-14A. The cargo door hinges are welded on in production.

Correction

A bolt on door side of the hinge is now available for service through GMSPO. There are no plans to release the body side of the hinge for service due to
feasibility of installation of that side of the hinge.

Parts Information

Hinge Pins and Bushings are multi-packaged by GMSPO. Parts quantity listed will complete this operation on both rear cargo doors.

Warranty Information

For vehicles repaired under warranty, use the table.

Service Procedure

1.

If you are involved with this procedure, you have a damaged door side of the hinge and it will be necessary to separate the door from the body side

Endgate - Broken Rear Cargo Door Hinge|Page 10692 > < Rear Door Exterior Handle|Service and Repair