Yukon 4WD V8-6.5L DSL Turbo VIN S (1997)
Installing The Outboard Lining
5. Outboard lining (5) with wear indicator (6) at leading edge of pad during forward wheel rotation.
^
The back of the pad must lay flat against the caliper.
6. Caliper (12). Refer to Brake Caliper Service and Repair.
CAUTION: Before moving the vehicle, pump the brake pedal several times to make sure it is firm. Do not move the vehicle until a firm pedal is
obtained. Check the fluid level in the master cylinder after pumping the brakes.
