gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Crankshaft, Engine > < Crankshaft Main Bearing|Removal|Page 2462
Page 3
background image

is 0.10-0.25 mm (0.004-0.0010 inch).

17. Inspect the crankshaft for binding.
18. Try turning the crankshaft to check for binding. If the crankshaft does not turn freely, loosen the crankshaft bearing cap bolts, one pair at a time,

until the tight bearing is located.

19. Burrs on the bearing cap, foreign matter between the insert and the block or the bearing cap, or a faulty insert could cause a lack of clearance at the

bearing.

Crankshaft, Engine > < Crankshaft Main Bearing|Removal|Page 2462