gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Air Door Cable, HVAC > < Mode Actuator
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Temperature Actuator

The temperature actuator is located in the passenger compartment of the vehicle, on the front of the heater case.

Remove or Disconnect

1. Negative battery cable.
2. Roll instrument panel forward.
3. Electrical connector.
4. Screws.
5. Actuator.

Adjust

A. Electrical connector to the actuator.
B. Turn the ignition key to the run position and let the actuator position itself.
C. Turn off the ignition key.
D. Remove the actuator from the electrical connector.

Install or Connect

1. Actuator.
2. Screws.
3. Electrical connectors.
4. Instrument panel compartment.
5. Negative battery cable.

-

Check circuit operation.

Air Door Cable, HVAC > < Mode Actuator