Yukon 4WD V8-6.5L DSL Turbo VIN S (1997)
Ash Tray Lamp: Service and Repair
REMOVE OR DISCONNECT
-
Make sure the headlamp switch is off.
1. Knee bolster. Refer to SECTION 8C.
2. Instrument panel storage compartment.
-
Squeeze sides together and pull out.
3. Ashtray assembly by unsnapping retainers.
4. Lamp assembly and shield from the top of the ashtray bracket.
5. Shield from the lamp assembly.
6. Bulb from the base by pulling it straight out.
INSTALL OR CONNECT
1. Bulb into the base by pushing it straight in.
2. Shield to the lamp assembly.
3. Lamp assembly and shield to the top of the ashtray bracket.
4. Ashtray assembly to the instrument panel.
5. Instrument panel storage compartment.
6. Knee bolster.
